Football Fundamentals - Power O Blocking

Originally posted at Maize n Brew on 8/30/13

 We've went over a brief primer to discuss some of the possible blocking calls that will be made during a Power O run. This time we are going to focus I specific examples of how an offensive line will adjust and make various block calls to face any defense.

Power O Basics




Diagrams
Rather than writing a lot, how about we look at diagrams.


Notice here that you actually have to doubles going to MIKE. If the CAGE double can't get to MIKE they will move on to the next off color jersey for a block. The MIKE doesn't need to be double teamed. SAM is the pulling BSG target. TE doubles with OT and must look to get push before releasing to the next level. Any penetration or push from that defender will get the BSG off track and ruin the timing of the play. In this instance, with two guys backside, look for the BST to attack inside rather than simply wall off the backside as to make sure to block the most dangerous player.


Typically "Kick" isn't the call here, but that's basically what the TE is calling. He's telling the PST that he won't be helping him and is instead going straight to his target in the second level. Because the TE is releasing so quickly, it would potentially allow the DE to pinch quickly, closing the hole, so it's likely the TE will chip in this case before releasing to the LB. On the backside, the BST is simply walling off any defender trying to scrape down the line to make a play.



BST must chip the DT where the pulling BSG vacates before fanning out, making sure that defender can't get penetration and beat the CTR upfield and scrape back.


PSDE lines up inside, so TE must single block him and let the OT know he is doing so, especially since the PST is doubling and getting to the LB level. The TE must seal inside so that the RB can kick this outside. The FB, once he must realize the LB is stacked. If the LB crashes down he will kick out as usual. If the LB is still at LB depth he will turn up and kick him inside, giving the RB the outside.


In an effort to take away power, the defense might line up their DT in a 4-tech where he is harder to root out of the hole and makes the hole for the RB skinnier. TE must help to uproot 4-tech before getting to the next level, must open the hole and then seal the LB inside.


Defense now walks down an 8th defender. Backside LB is left unblocked though, because he is very little threat to the success of the play. Usually the walked up defender will have outside responsibility, so DE moves heads up on the TE. The TE will seal him inside and the FB will attack the SS.


Moving the NT into a 0-tech makes the combo block a little more difficult, but has little change from the 4-4 above overall as far as running Power O is concerned.



4-4 Over 4 above. Much like the 4-3 over 4, it will be used to stop power. Likely you'd like to check out here, as the SS is left unblocked. But if it's a short yardage situation, you can still run it and trust your RB to get the best of the SS in the hole.


Switching to and Under front here. TE and PST will combo to the LB.


Shifting the DT to a 1-tech might help against an Iso run, but really doesn't help against Power.


The Loose call leaves the LB stacked. The TE will make a call indicating such. Likely, you'd hope the QB would let the FB know so he knows the situation.


This makes it a little harder because you now have a couple guys you need to root out or at least prevent penetration. So there is room with this defense to disrupt Power. But it can still be blocked.


Yup.


Now we get to the Bear defense and you see why it is so difficult to run against. No one is combo blocking, so it is difficult to get a decent to good push everywhere on the line and not disrupt the pulling guard. It also means there is a free tackler that can scrape across and make a play. This is why you don't run against a Bear.

But what if the defense blitzes? How does the OL make a call for that? Well, unless the defense tips their hand presnap, they can't. They must also be able to adjust on the fly, understanding their assignment so that they can be successful in these cases as well.



Video


Note the DE is lined up inside initially, so the TE takes him here and the FB gets to the second level.



Different formation, but essentially Power nonetheless. FB kicks out the EMOL and OG pulls up and in. Having and extra blocker gives Denard and an extra lead blocker at the point of attack in the form of another RB.

And here's a look at Open Power O


Not the FB will have a different angle, and some of the calls and techniques change a little, but you see a lot of the same philosophy here as you do with a Closed Power O.

Conclusion
If you want, you can change up personnel, make a DT a DE and a DE a OLB, and see pretty much most 3-4 formations above as well. Against 3-3-5 teams and 4-2-5 teams it will depend on how the box safeties align, but you can at least envision how the blocking will go down from above. The crazy thing is that this is the assignments, with fairly clear rules but still quite daunting, that ever O-linemen must know for every single run play. If they don't know how to block a front then you have a wasted play, which you can't afford to absolutely throw away a play. There are certainly defenses above that a better designed to defeat Power, ones that will be more difficult for the offense to successfully block, but with execution and the correct reads, the team can be put in a position to successfully run the ball at any time.

Comments

  1. We ran this quite a bit ,we had a wrinkle that worked well against what we called 4-4 with a 7 technique to the TE and a OLB . TE would make a long or short call. On long call he would block the DE and FB would kick OLB. We used this when the OLB was walked up on the line and was more of a threat. If the OLB was backed off we used the short call. TE would step down on DE to influence him to fight back outside then release to OLB. FB would kick out the DE. Really messed with the DE.

    We also played around with an adjustment vs 4-3. We would have the TE work to outside shoulder of DE like a hook block to get him to work to maintain outside leverage. FB would lead on SAM with backside guard pulling to MIKE. Didn't have as much success with this,

    ReplyDelete
    Replies
    1. Both of those I think were adjustments made in the 80s or 90s, can't remember though. But yeah, the common method of stopping a Power O team was to stick a 7 tech in there. It's hard to kick him with the FB and it makes it hard for the playside to downblock the 2nd level. So teams started making the adjustment you're talking about with pretty big success.

      The second one is one you see quite a bit with shotgun teams, though usually a little differently than how you describe it. I think because most of them have a strong OZ base it really works. Get that TE to really work to release outside of the DE and work his way up to the 2nd level and seal the SAM. The DE trying to work against the supposed hook block tries to regain outside leverage, widens the hole and then is easier to kick. But I think what you describe would work nice to if you have a really good blocking TE and wanted a bit of a quicker hitting play.

      Delete
    2. By the way, love people adding to the blog. There are always things out there I don't know or haven't seen or haven't done or just can't speak very well on. There are so many different ways people do these things and by no means can I tough on them all for a variety of reasons, so I really appreciate the comment.

      Delete

Post a Comment

Popular posts from this blog

Football Fundamentals: Twins Passing Concepts

Football Fundamentals: 2x2 and Mirrored Passing Concepts

Football Fundamentals: The Tite Front Defense