Football Fundamentals: I-Formation RB Isolation Run Plays

By -
This is a series post with lots of play diagrams. Where it lacks depth, it hopefully makes up for with breadth. The goal of this post is to demonstrate the many run game nuances that are at your disposal, outside the very basics that you can find almost anywhere. I will point out some key attributes for the plays, but for the most part the diagrams will stand alone outside a brief description. This post is limited (out of necessity) to strongside plays that are given directly to the RB. It does not include FB runs, or QB runs, or H-Back, Wing, TE, or WR runs. It also doesn't include option plays. Those are things for future posts.

Why did I select an I-formation, which is mostly going out of fashion, and how do I expect this information to be utilized? The I-Formation is a classic 2-back set that, by the time it was implemented, had the benefit of a lot of football history. It is also a highly adaptable run formation, along for offsets, for H-backs, and other aspects that allow essentially any run concept to be incorporated into its framework. And that's the important bit: you can look at an I-Formation run play and easily carry it forward to many modern formations. For instance, by altering footwork and possibly timing, any of these plays can be utilized in the following:
  • 2-Back Shotgun Runs (with the second back potentially being a FB, an H-Back, a Wing, or a Sniffer)
  • 1-Back Shotgun QB Runs (utilizing the RB as an added blocker)
  • 1-Back Shotgun Read Options (the read of a run-run option, run-pass option, or pass-run option take the place of the additional blocker).
Many of the best current offenses often circle back to old formations. In the NFL, along with the modern spread concepts, you see a lot of the best offenses utilizing Wing T concepts. This set of plays does the same where it can (though, again, recognize that the option packages and fake packages are not included in this post, so it is somewhat limited). Below, you will see each play blocked against the two fundamental Even Fronts (4-3 Over and Under).


 Let's start with Isolation Plays



Isolation Plays

Iso
This is the basic Iso play, which I've detailed here. ID the MIKE, block him with the FB, and get downhill.

Double Iso
This play is like the Iso, but utilizes a second lead blocker. If there is an unaccounted for overhang defender, the added iso blocker with ID him and make that block.


Insert Iso
Typically known as a shotgun run play, the insert iso with see the playside lead blocker account for the playside LB, regardless of defensive formation. This allows the second lead blocker to take a different path to the next LB to the backside of the formation.



Kick-Insert
Swapping roles of the Off-Y TE and the FB provides some backfield cross flow which can cause the LB level to freeze as it attempts to read the play. 


Dive
Another isolation play, but here the FB is going to take a backside LB rather than a playside LB. This altered path can cause the LB level to hesitate, allowing for extended doubles at the point of attack and/or greater spacing between levels.


Fan Iso
This run play incorporates fan blocking on the front side (i.e. block the gap outside). In this way, it limits double teams, but ensures you remain gap sound and allows the OL to get immediately out to the second level. Often times this play will cut back, as the FB runs through the primary hole, but has blocking responsibility on the backside LB.


Bear Iso
Created as a counter to a Bear defense, a Bear Iso is a standard Iso with an added fold block rather than a double to the backside LB.


Lead
Take an Iso play and kick it one gap further playside and you get a Lead Play


Double Lead
Just like the Double Iso, you are adding a lead blocker through the run hole. But again, if there is an unaccounted for edge player that could potentially cut into the back field, the blocker must account for him.



Midline Seal-Out
Based on the midline option play, the idea here is that you are effectively all working toward sealing out the playside A gap. This means extended doubles in the middle that tend to work vertical into the lap of the LBs. Added initial flow playside can help influence the LBs to treat it like Duo.



Crack Boss
The "Isolation" player here is the safety, as the FB will be eying him with his block. In order to do that, one of the most effective ways is to have a crack block from the edge. Why force LBs and Safeties make tackles when you can force a CB.


* Note, all nomenclature is my own, though attempts to be fairly consistent with standard. As plays get added, you can add "tags" to base plays (as I have done) or create single word names to take the place for shorter communication.


Comments

Post a Comment

Popular posts from this blog

Football Fundamentals: Twins Passing Concepts

By -
Image
In this post we will look at some of the standard route concepts run from a twins alignment. Obviously, these can be paired with other routes (some I'll show including a RB), but this is to get the fundamental understanding of the routes. I'll try to explain the concept briefly, as well as provide names for what you'll hear the concept called elsewhere at times (these things get lots of names, some people use the same names but have different meanings too, so it can get confusing). If a number is visible near the end of a route, that is the nominal yardage the route will be run to. For more information on specific routes, we took a look at the  route tree earlier . In this article I will not discuss routes that utilize rub concepts close to the LOS (such as a switch concept). I will have a later article dedicated to rub routes from a Twins set. Many of these are similar to the TE-Flanker Concepts discussed earlier.
Read more

Football Fundamentals: 2x2 and Mirrored Passing Concepts

By -
Image
We are going to continue our look at various passing concepts, this time with 2x2 and mirrored passing concepts. In this post we are going to trim out the concepts that are designed to attack the middle of the field and put those into a separate post. 2x2 concepts allow an offense to attack a defense based on post-snap looks and coverages via a simple read of the safety. Completely mirrored concepts, when the same concept is run on the both sides of the formation (such as all-hitches), is something of which I'm not a huge fan, but there are advantages to it. You look at something like all-hitches, which overloads underneath zones, and you see a viable option in the short passing game against zone heavy teams; similarly, completely mirrored concepts can allow you to pick on certain defenders or to a certain side of the field based on defensive look. We'll also look at "base" concepts, which see the outside receivers run the same route, and a third receiver work the mid
Read more

Football Fundamentals: The Tite Front Defense

By -
Image
The defense du jour against modern spread attacks is what is commonly known as the “Tite” front. Over the past couple years, you’ve seen Big 12 teams run it increasingly often, and SEC and other teams start to incorporate variants of the look more often as well as they begin to deal with an increasing number of spread formations. But what exactly is the “Tite” front? Like any front, say, a 4-3 Under, it isn’t necessarily any one thing. You can have single-high, two-high, or even three-high safeties. You can attach your overhangs differently. And with Tite, it may even mean different box numbers. And of course, there are multiple techniques that can be employed along the way. This post is a primer to the Tite front. At the end, I’ll link some of the better articles that get into greater depth for those interested, but for now, we need to understand the basics, so that we can understand how to attack it.
Read more